Magics 27
| # | Area | Issue | Status |
|---|---|---|---|
| 1146380 | CO-AM | CO-AM part is considered as modified after Translate + Copy operation | |
| 1146381 | CO-AM | Undo/Redo operations don’t change the state of "Save part to CO-AM" button | |
| 1146382 | CO-AM | Operations recorded for a specific part revision in CO-AM can include some positioning and supports changes from other parts | |
| 1146377 | Edit - Tools | In specific cases, some edges causing failure of BREP Fillet operation are not rendered in error state | |
| 1146378 | Edit - Tools | In some cases, a BREP Tensile bar primitive might have wrong orientation upon creation that can be adjusted manually afterwards. | Resolved in MGX 28.0 |
| 1146379 | Edit - Tools | In some cases, filleting a convergent body might result in error. | |
| 1146392 | Installer | After uninstallation, the uninstalled Magics version is still available in the Windows ‘open with’ list | Resolved in MGX 28.0 |
| 1146393 | Installer | No desktop icon/shortcut is created in case Magics is not installed in the default destination folder | Resolved in MGX 28.0 |
| 1157117 | Licensing | Magics can't recapture the floating licenses after the network connection is restored: Press “No” on the message about recapturing licenses. Then open Licenses > Connect to floating license server. It should be possible to restore the connection this way. | Resolved in MGX 28.02 |
| 1146374 | Machine Manager | Gas flow direction not always correct: Gas flow angle defined on Machine Manager portal will show correct direction of the Gas flow on platform scenes only for values: 0, 90,180, 270 or 360 degrees. | Resolved in MGX 28.0 |
| 1146375 | Machine Manager | In rare cases, for rectangular platforms with rounded corners defined on Machine Manager - the platform won’t be visualized in Magics. | |
| 1146376 | Machine Manager | Field overlaps that aren’t connected to two opposite sides of the platform won’t be visualized on the platform scene in Magics. | |
| 1146365 | Open - Save - Add - Unload | File preview of Magics files containing BREP models is not shown | |
| 1146383 | Open - Save - Add - Unload | Missing CAD import(s) after Magics upgrade: click here for more info and a work around | Resolved in MGX 27.02 |
| 1146384 | Open - Save - Add - Unload | In certain cases, no warning is shown asking the user to save a BREP part/ BREP part scene | Resolved in MGX 28.0 |
| 1146385 | Open - Save - Add - Unload | Select orientation: when clicking close, all subsequent part loading is cancelled regardless of "Apply to all" state. | |
| 1146386 | Open - Save - Add - Unload | Part selection can not be saved to matamx files | Resolved in MGX 28.0 |
| 1146387 | Open - Save - Add - Unload | Importing of files via MatConvert is not possible if the file path is longer than 256 characters. (MatConvert known issue) | Resolved in MGX 28.0 |
| 1146388 | Open - Save - Add - Unload | Magics hangs during import part to platform: In rare cases, importing part on the platform can block ‘Select Orientation’ dialog resulting in an infinite Magics hang. As workaround, the ‘Select Orientation’ dialog should be disabled in Magics settings. | |
| 1146389 | Open - Save - Add - Unload | Unicode characters are not supported when exporting a BREP model to STEP | |
| 1146390 | Open - Save - Add - Unload | Concept of colours for BREP models is not fully supported yet, only face colours are being preserved upon import of a part. | |
| 1146401 | Open - Save - Add - Unload | Importing preferences might cause the wrong MatConvert to be used: Upon importing preferences from a another Magics installation (either via import settings, or upon launching a newly installed Magics version), Magics will also update the MatConvert version settings. This could cause Magics to use an older MatConvert that does not contain the latest compatibility or functionality needed to fully use Magics. For Magics 27 it is recommended to use MatConvert 10.4 or higher. This can be set in Settings > Modules > MatConvert | Resolved in MGX 27.02 |
| 1146398 | Undo Redo | The name of original part is not restored after Undo of multiple operations. | Resolved in MGX 28.0 |
| 1146397 | Position - Nesting - Sinter | In some cases, for Top/Bottom plane operation, ‘Indicate plane’ button should be re-activated to make it work after changing part selection. | Resolved in MGX 28.0 |
| 1146391 | Product | Magics is not considering the concept of sRGB: click here for more info and a work around | |
| 1146396 | RapidFit | Rapidfit command is not present in default UI profile however it can be launched from the quick search in the platform layout. | |
| 1156339 | Rendering | Icons may appear small on high DPI screens. | |
| 1146400 | Simulation | The point legend is missing in the ‘Compare Points’ graph under Simulation | |
| 1146399 | Slicing | The zone legend is missing in the ‘Check Slices Distribution’ graph | Resolved in MGX 28.0 |
| 1146402 | Support Generation | Failure to save SG profile in Magics 27: click here for more info and a work around | Resolved in MGX 27.02 |
| 1146403 | Support Generation | Disabling the showing of perforations in supports can lead to supports overlapping with a part. | Resolved in MGX 28.0 |
| 1146404 | Support Generation | Incorrect generation of tree supports: In situations where a part that has a surface that is (partially) closer than 1mm to the platform and that is supported by trees with angling applied, can lead to incorrect tree supports being generated. | |
| 1146405 | Support Generation | The ‘Trim supports on other parts’ functionality might not work as expected when used in combination with post-processing. | Resolved in MGX 28.0 |
| 1146406 | Support Generation | The ‘Trim supports on other parts’ functionality might not work as expected when used with tree supports and a part intersecting the tree supports is moved. | Resolved in MGX 28.0 |
| 1146407 | Support Generation | The ‘Trim supports on other parts’ functionality might not work as expected when moving the part on which support structures of another part rests. | Resolved in MGX 28.0 |
| 1146408 | Support Generation | Empty support surfaces can remain when proceeding without finishing the "Add tree" operation: When the creation of manual tree support is not properly finalized (by right mouse button click) or cancelled (by pressing escape), an empty support surface can remain. This support surface can be removed manually. | |
| 1146410 | Support Generation | Regenerate not working for tree supports with a modified surface: Modifying a support surface (e.g., adding or removing triangles) with Tree supports and using ‘regenerate’ button will not update the Tree supports with the modified surface. Changing to and from another support type or modifying a parameter will trigger the update of Tree supports with the modified surface. | |
| 1146412 | Support Generation | In some cases, manually added supports are transferred with wrong position. | |
| 1146413 | Support Generation | Thickened non-solid support may intersect or detach from the part or create open contours. | Resolved in MGX 28.0 |
| 1146415 | Support Generation | Applying 2D Cut on a Block support with thickened border may result in alteration of the geometry on the border corners. | Resolved in MGX 28.0 |
| 1146416 | Support Generation | No-support zones on marked Structures (for some geometries of Structures) are ignored during e-stage generation. | |
| 1156629 | Support Generation | Part-to-part Volume support creates minor artefacts for bottom Z offset value of "0.000" mm | |
| 1157357 | Support Generation | In some cases, transferred support is incorrectly generated on the destination part, causing support to go through part. | |
| 1157358 | Support Generation | In some cases, transferred support will use profile parameters for the destination part instead of the modified parameters of the origin part. | |
| 1157360 | Support Generation | When converting a 'Support library' (from Magics 22 or older) into a 'Support generation profile' (in Magics 23 or newer), the rescaled center parameter might receive a wrong value. | |
| 1157416 | Support Generation | Offset of "Raft" is only changing for certain values. |
Magics 28
| # | Area | Issue | Status |
|---|---|---|---|
| 1150294 | Analyze - PMI - Report | Detect trapped volumes dialog is shown in the light theme even when the dark themes is selected in Magics settings. | |
| 1148949 | Analyze - PMI - Report | Unselecting a BREP part while Wall thickness analysis dialog is open makes it impossible to run the analysis on the part without restarting the command. | |
| 1154826 | Build Processor Manager, BPS, BP | Magics may freeze when a platform is open from a connected printer, and the printer goes into maintenance / offline | |
| 1146380 | CO-AM | CO-AM part is considered as modified after Translate + Copy operation | |
| 1146381 | CO-AM | Undo/Redo operations don’t change the state of "Save part to CO-AM" button | |
| 1146382 | CO-AM | Operations recorded for a specific part revision in CO-AM can include some positioning and supports changes from other parts | |
| 1146377 | Edit - Tools | In specific cases, some edges causing failure of BREP Fillet operation are not rendered in error state | |
| 1146379 | Edit - Tools | In some cases, filleting a convergent body might result in error. | |
| 1157365 | e-stage | Beam lattice added as „No support zone” will be ignored when executing „Generate e-Stage of selected”. | Resolved in MGX 28.01 |
| 1156340 | Installer | On Windows 11, the installer might become unresponsive for several minutes.: <div>The installation will still complete successfully if you let it run.<br> </div> | |
| 1157117 | Licensing | Magics can't recapture the floating licenses after the network connection is restored: Press “No” on the message about recapturing licenses. Then open Licenses > Connect to floating license server. It should be possible to restore the connection this way. | Resolved in MGX 28.02 |
| 1146375 | Machine Manager | In rare cases, for rectangular platforms with rounded corners defined on Machine Manager - the platform won’t be visualized in Magics. | |
| 1146376 | Machine Manager | Field overlaps that aren’t connected to two opposite sides of the platform won’t be visualized on the platform scene in Magics. | |
| 1146385 | Open - Save - Add - Unload | Select orientation: when clicking close, all subsequent part loading is cancelled regardless of "Apply to all" state. | |
| 1146388 | Open - Save - Add - Unload | Magics hangs during import part to platform: In rare cases, importing part on the platform can block ‘Select Orientation’ dialog resulting in an infinite Magics hang. As workaround, the ‘Select Orientation’ dialog should be disabled in Magics settings. | |
| 1146389 | Open - Save - Add - Unload | Unicode characters are not supported when exporting a BREP model to STEP | |
| 1146390 | Open - Save - Add - Unload | Concept of colours for BREP models is not fully supported yet, only face colours are being preserved upon import of a part. | |
| 1146365 | Open - Save - Add - Unload | File preview of Magics files containing BREP models is not shown | |
| 1156449 | Open - Save - Add - Unload |
The import parameter dialog is never shown anymore if "Apply to all" was selected during a previous import: If multiple files of the same format are imported through MatConvert and the “Apply to all” checkbox was selected, the next time that a single file (or multiple files, but none with the same file format) is imported through MatConvert, no import parameter dialog will be shown. This issue can be avoided by deselecting “Apply to all” when importing multiple files through MatConvert. If the issue has already occurred, it can be reversed by importing multiple files of the same format: the dialog will appear and the “Apply to all” checkbox can be deselected. Afterwards, the import parameter dialog will be shown again for all file imports through MatConvert. |
Resolved in MGX 28.01 |
| 1157102 | Open - Save - Add - Unload | Specific Inventor files may have geometrical errors: Depending on the file, using earlier versions of MatConvert may result in less geometrical errors. For this specific issue, we suggest to use MatConvert 10.2 or earlier. | Resolved in MGX 28.02 |
| 1157110 | Open - Save - Add - Unload | File units parameter in the import dialog is always reset to mm | Resolved in MGX 28.01 |
| 1156978 | Options and Help |
When resetting the settings, the following parameters aren't reset to their default values: Under Settings > General > Measurements quality
Under Settings > Visualization > Grid
|
|
| 1146391 | Product | Magics is not considering the concept of sRGB: click here for more info and a work around | |
| 1157100 | Product | Toolpage docking areas don't stay collapsed after restarting Magics | Resolved in MGX 28.01 |
| 1156339 | Rendering | Icons may appear small on high DPI screens. | |
| 1146400 | Simulation | The point legend is missing in the ‘Compare Points’ graph under Simulation | |
| 1154830 | Slicing | Slice preview for beam lattices is not shown | |
| 1149113 | Slicing Concept laser (CTools) | Folders for CLS files output should have titles in Latin characters, otherwise files will not be created | Resolved in MGX 28.01 |
| 1157357 | Support Generation | In some cases, transferred support is incorrectly generated on the destination part, causing support to go through part. | |
| 1157358 | Support Generation | In some cases, transferred support will use profile parameters for the destination part instead of the modified parameters of the origin part. | |
| 1157360 | Support Generation | Possible migration incompatibility of support parameters from older Magics versions: When converting a 'Support library' (from Magics 22 or older) into a 'Support generation profile' (in Magics 23 or newer), the rescaled center parameter might receive a wrong value. | |
| 1157361 | Support Generation | Cancelling „Re-trim support on platform” for parts containing Tree support will cause Magics to become unresponsive. | |
| 1157363 | Support Generation | When virtual copies are present on the platform, marked beam lattice will not be added as a „No support zone” | Resolved in MGX 28.01 |
| 1157364 | Support Generation | When executing Boolean of beam lattice and mesh, previously added beams as „No support zone” will be removed from the „No support zone”. | |
| 1146404 | Support Generation | Incorrect generation of tree supports: In situations where a part that has a surface that is (partially) closer than 1mm to the platform and that is supported by trees with angling applied, can lead to incorrect tree supports being generated. | |
| 1146408 | Support Generation | Empty support surfaces can remain when proceeding without finishing the "Add tree" operation: When the creation of manual tree support is not properly finalized (by right mouse button click) or cancelled (by pressing escape), an empty support surface can remain. This support surface can be removed manually. | |
| 1146410 | Support Generation | Regenerate not working for tree supports with a modified surface: Modifying a support surface (e.g., adding or removing triangles) with Tree supports and using ‘regenerate’ button will not update the Tree supports with the modified surface. Changing to and from another support type or modifying a parameter will trigger the update of Tree supports with the modified surface. | |
| 1146412 | Support Generation | In some cases, manually added supports are transferred with wrong position. | |
| 1146416 | Support Generation | No-support zones on marked Structures (for some geometries of Structures) are ignored during e-stage generation. | |
| 1156629 | Support Generation | Part-to-part Volume support creates minor artefacts for bottom Z offset value of "0.000" mm | |
| 1156632 | Support Generation | In some cases, thickened border of Block support might contain overlapping triangles. | |
| 1156633 | Support Generation | Slicing Stabilization wall support with applied thickness will result in faulty vectors. | |
| 1157414 | Support Generation | While changing the value of "Thickness" in the 2D edit dialog, value will change to "1" when trying to input "0": As a work-around you can select the content of the input box (with the mouse) and delete it. After that it is possible to input a value that starts with "0". | Resolved in MGX 28.01 |
| 1157416 | Support Generation | Offset of "Raft" is only changing for certain values. | |
| 1157417 | Support Generation | Lower Z offset is not applied to the Gusset with thickness. | Resolved in MGX 28.01 |
| 1157418 | Support Generation | Upper Z offset not applied correctly for Point with thickness supporting thin geometrical features. | Resolved in MGX 28.01 |
| 1233953 |
Support Generation |
Thickened supports might create open contours and empty slices: click here for more info and a work around |